We fix what's broken, fast, and we don't disappear after the invoice. Priority scheduling available across Hillside and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC didn't start as a franchise chasing volume. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
We're not interested in being the cheapest quote on the page — we're the company that tells you what actually needs fixing instead of what pads the ticket. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Being local matters more than most companies let on. That local knowledge shapes the maintenance schedules we recommend — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Hillside and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Hillside is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Hillside rooftop unit. We keep parts inventory stocked based on what actually fails most often on Hillside's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Hillside dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Hillside homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services rooftop units and package systems across Hillside, with priority response for facilities that can't afford downtime.
Our commercial techs are trained to work around your customers and staff, scheduling noisy or disruptive work outside peak hours whenever possible.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Hillside households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
A technician doesn't consider the job done until the system is tested and performing correctly.
Catching these signs early usually means a same-day repair instead of an emergency call at the worst possible moment.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A tune-up often identifies exactly what's driving the extra energy use.
This is one of the warning signs we recommend not waiting on.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Because our trucks are stationed near Hillside, we're rarely far from your address.
If something isn't right after we leave, we come back and make it right.
Our techs recognize brand-specific quirks instead of learning your system on the job.
You make the final call — we just make sure you have the full picture.
Maintenance plan members get priority scheduling and discounted rates.
Every review below reflects an actual service call in the Hillside area.
"I called three other companies first and this was the only one that actually picked up. The pricing was exactly what they quoted over the phone."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. You can tell these guys actually know what they're doing."
"They handled the whole install in a single day, exactly like they said they would. New system is noticeably quieter and our energy bill actually dropped."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Now our go-to for every property in the portfolio."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Would use them again without hesitation."
"Diagnosed a failed capacitor and had it swapped within the hour. This is the company I'm saving in my phone now."
After thousands of service calls across Hillside, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Hillside home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Manufacturer-certified across multiple major residential equipment lines.
Keeps the emergency truck stocked based on what actually fails most often locally.
Experienced with the light industrial and retail equipment common across the area.
Because our trucks are staged near Hillside, average arrival windows run faster than what national chains typically offer.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
We staff after-hours dispatch specifically because HVAC failures rarely happen on a convenient schedule.
We maintain current credentials because it protects both our customers and our team.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Hillside and the surrounding communities, including the zip codes listed in our coverage section below.
Property managers and business owners can request a dedicated point of contact for ongoing service.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
Ask about current after-hours rates when you call +1-866-805-8548.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Hillside installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Hillside and the neighboring communities, keeping response times tight because our trucks stay close to home.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
